Kaihara — Application decision branches

Choose the garment setting before you compare two denim cuttings that only look alike on a screen.

Ask a denim question

Application decision branches

  1. What is the use environment?

    • Indoor contact and home laundry for jeans that sit against skin for a full day.
    • A jacket shell that takes more surface rub at the cuff than at the back yoke.
    • A trouser cutting room where usable width and seam allowance decide marker yield.

    Start with where the cloth lives after it is sewn. A five-pocket jean sees abrasion at the thigh and repeated washing. A jacket may care more about drape at the sleeve and shade match between body and sleeve panels. A workwear trouser may care about seam slippage under load. Those are different briefs even when the fiber composition line looks similar. Outdoor exposure, if it is part of the garment story, should be described as weather and wear, not as a waterproof claim. Liquid resistance and water vapor transmission are separate tests and are rarely the first denim question. If either one is on your spec, name the method and keep it off the shade line.

  2. Which decision matters first?

    Handling and appearance

    Use a physical sample and an agreed shade reference. Cotton-rich rigid denim often feels drier and shows the twill more clearly. A construction with elastane can add recovery and change the hand. Neither side is a universal winner. Handfeel, pilling and the look after wash have to be judged on the cutting you will actually approve. GSM alone will not settle that argument.

    Functional behaviour

    If durability is the opening gate, ask for abrasion resistance or tear strength with the method and the end point written beside the figure. ISO 12947 (Martindale) and ISO 13937-2 (tear) are different questions. If comfort after wash is the opening gate, dimensional stability and the care cycle matter more than a dry abrasion number. A single index cannot stand in for both. Stretch recovery, when elastane is present, needs its own note so a 2% elastane cloth is not mixed into a 100% cotton tensile result under ISO 13934-1.

  3. What should the inquiry include?

    Send fiber composition, weave construction, quantity and destination. Add GSM, usable width in centimetres, and the finish if the reference already has one. Mention whether you are comparing cloth already on hand or asking for a development sample. A stock comparison can use the lot identity you can see. A custom shade needs a lab dip path and a shade band discussion before anyone talks about bulk metres. Include the garment pattern constraint if the selvedge must stay visible or must stay out of the seam.

Describe the garment environment

Wash, shade across panels and seam load make a denim brief specific.

Discuss your fabric requirements