"What's the best fabric?" is the wrong question
I've been handling fabric sourcing and apparel orders for eight years. In that time I've personally made (and documented) eleven significant mistakes, totaling roughly $9,400 in wasted budget. Almost half of that came from one bad assumption: that "premium" is a single ladder, and any premium fabric can substitute for any other if the budget allows.
In 2019 I specified a midweight denim for a women's slip-dress capsule—600 units. On the spec sheet it read "100% cotton, 12oz, dark indigo." Sounded exactly right. The samples looked fine on hangers. On bodies, they stuck, hung wrong, and refused to drape. We sold 210 units and wrote off the rest. That's $4,300 in fabric, cutting, and sewing I'll never see again—plus a conversation with the brand owner I'd rather not repeat.
The lesson wasn't "denim is bad." It was that I'd asked the wrong question.
The question isn't which fabric is best. It's which fabric is built for what you're asking it to do. Nobody can answer that without knowing the end use—not me, not Kaihara, not anyone selling you lyocell or viscose.
So here's how I sort it now. Three scenarios. Yours is almost certainly one of them.
Scenario 1 — The garment's shape comes from the fabric itself
If your design depends on the fabric holding structure—jeans, trucker jackets, heavy work shirts, rigid overshirts, five-pocket denim pieces—you're in denim territory, and specifically in the Kaihara denim mill's territory.
Some context: Kaihara has been weaving in Fukuyama, Hiroshima since 1893. The mill's reputation rests on selvedge denim—narrow-loom fabric with the self-finished edge, produced on shuttle looms at low speed. "Kaihara selvedge denim" in the trade usually means exactly that: slower output per meter, tighter weave consistency, and a hand that breaks in rather than wearing out.
What that buys you, concretely:
- Shrinkage you can plan for. Unsanforized selvedge denim can shrink 7–10% in length after a soak. Sanforized versions are more predictable. Neither is "safe"—but both are specifiable. Account for it in the pattern, not after cutting. (I learned this the $4,300 way.)
- Fade character. Indigo on ring-spun cotton at low tension fades along the wear lines. That's the whole point for premium denim buyers and it's very hard to fake in a cheap fabric.
- Durability where it matters. Selvedge seams don't fray the way overlocked seams do at the outseam. On a 14oz jean, that difference shows up around month 14.
Here's the boundary I have to be honest about: if your garment needs to move like water—dresses, fluid blouses, drapey trousers—no amount of denim expertise fixes that. You can't weave your way out of physics. Kaihara makes denim. Asking a denim mill for a fluid cellulose wovens is like asking a steakhouse for a vegan tasting menu. They'll try. It won't be their strength.
Scenario 2 — The garment needs drape, sheen, and movement (lyocell)
Lyocell fabric is a regenerated cellulose fiber—wood pulp (usually eucalyptus) dissolved in an amine-oxide solvent (NMMO) and spun. As of 2025, the standard industry claim is that solvent recovery in the closed loop exceeds 99%, which is why it gets marketed as the "greener" cellulose. I don't take marketing claims at face value, but the solvent-recovery data is well documented and roughly accurate. What I care about more is how it behaves on a cutting table.
Lyocell fabric characteristics that actually matter for a spec sheet:
- High wet strength. Roughly 2–3x that of viscose. This is the single biggest reason to pay the lyocell premium if the end user will machine-wash.
- Soft, cool hand with a subtle luster. Not shiny—more like the surface of a just-peeled grape.
- Controllable fibrillation. The fiber can be enzyme-treated to a peach-skin surface, or left smooth. Two lyocell fabrics can feel completely different and still both be "100% lyocell."
- Pilling caveat. Low-twist lyocell knits pill. Higher-twist wovens generally don't. Ask for the twist spec before you assume.
I learned the fibrillation point by skipping a step. On a 1,200-unit blouse order in Q1 2023, I approved the swatch on hand feel alone. The bulk lot came back noticeably firmer and smoother—same fiber, different finish, different twist in the yarn. The brand accepted it, but I ate $1,700 in rework because I hadn't requested a garment-dye test on the final bulk lot. Swatches lie. Bulk tells the truth.
When to spec lyocell: fluid dresses, blouses, drapey shirting, soft "denim-look" trousers where a denim mill genuinely can't help you (there's a reason lyocell denim blends exist—they solve a problem selvedge can't).
Scenario 3 — Cost is the constraint but drape is still the goal (viscose)
What is viscose fabric? It's also regenerated cellulose—wood pulp treated with carbon disulfide and sodium hydroxide (the xanthate process) and spun into filament. Cheaper to make than lyocell, excellent drape, softer wet hand, and it takes dye beautifully.
The trade-offs are real and I won't pretend otherwise:
- Low wet strength. Roughly a third of lyocell's. Hand-wash only, in practice, regardless of what the care label says.
- Higher shrinkage. 4–6% on a lot is not unusual without pre-shrinking. It's also less consistent lot-to-lot than lyocell, which is the sneaky part.
- Care sensitivity. Heat and tumble-drying will shorten the garment's life noticeably. This is not a fiber you spec for workwear.
When viscose makes sense: price-sensitive programs, fast-fashion-adjacent lines, high-volume casual wovens, and linings.
I went back and forth between lyocell and viscose for 1,800 units of a SS23 midi dress—probably a week of afternoons on it. Viscose offered roughly 28% savings at the fabric level. Lyocell offered better wet strength, which mattered because the end user would wash it often. I chose viscose. It was the wrong call for that customer. We ended up with 4% shrinkage on roughly 300 pieces that had to be replaced. The savings were real; the rework ate most of them. My rule since: if the end user will machine-wash and tumble-dry, I don't spec viscose unless the supplier provides a documented shrinkage test on the actual bulk lot.
How to tell which scenario you're actually in
Three questions, in order. Answer honestly.
- Does the silhouette depend on the fabric holding its shape? Jeans, jackets, structured overshirts → Scenario 1. Go talk to Kaihara (or your denim mill).
- Does the garment need to move, drape, or catch light? → Scenario 2 or 3. Not 1. Never 1.
- If 2 or 3: will the end user machine-wash and tumble-dry? Yes → lyocell. No, and the supplier provides bulk shrinkage data → viscose is on the table.
One last boundary, because I've paid for this lesson twice now. A supplier who tells you "that's not our strength—here's who does it better" is more useful than one who promises everything. The denim mill that admits it can't drape a slip dress, and the cellulose supplier that says "we're not a workwear fabric"—those are the ones I trust with everything else. The mill that says "we do it all" is the one I check first, and order from last.